CMX 51.2V 660Ah LiFePO4 Battery for Mini Forklift and Electric Vehicle
The CMX 51.2V 660Ah LiFePO4 Battery for Mini Forklift and Electric Vehicle is a LiFePO4 battery for electric forklifts. Engineered for long service life, a protected smart BMS, and safe, low-maintenance operation.
- 51.2V · 660Ah
- 6000+ cycle life · 5-year warranty
- Agriculture/Marine: Long endurance, resistant to harsh environments, and stable power output to ensure prolonged and efficient operations.
- Marine: Waterproof and anti-corrosion, safe and reliable, with strong power to guarantee stable navigation on water.
Overview
The CMX 51.2V 660Ah LiFePO4 Battery for Mini Forklift and Electric Vehicle is a drop-in lithium iron phosphate (LiFePO4) power pack engineered for small electric forklifts, walkie stackers, pallet trucks, and light electric vehicles. Rated at 51.2V (16-series LiFePO4) with a 660Ah capacity, it delivers about 33.8 kWh of usable energy in a sealed, space-saving enclosure that replaces bulky, high-maintenance lead-acid batteries without changing the compartment or charger footprint in most applications.
CMX builds the pack from automotive-grade LiFePO4 cells and a self-developed smart BMS. The result is a battery that stays balanced, runs cool, and is protected across its whole service life — so operators get flat voltage through discharge, fast opportunity charging, and far less downtime than lead-acid.
Key Features
- Drop-in lead-acid replacement — same nominal voltage and a compact form factor that fits standard mini-forklift and pallet-truck battery compartments; 100% usable capacity with no watering, equalizing, or acid handling.
- Long service life — 3,500+ cycles at 80% depth of discharge, far beyond the 500–1,000 cycles typical of lead-acid, lowering the cost per cycle over the equipment’s life.
- Smart BMS with full protection — over-voltage, under-voltage, over-current, short-circuit, and over/under-temperature protection plus automatic cell balancing keep every cell within safe limits.
- Fast & opportunity charging — supports opportunity charging during breaks, removing the long equalize cycles lead-acid requires and extending daily uptime.
- Flat discharge curve — LiFePO4 holds voltage near nominal through most of the discharge, so the forklift or EV keeps full power until the pack is nearly empty.
- Built for industrial use — sealed, vibration-resistant enclosure, low self-discharge, and stable output from cold-start to high-temperature operation, with low-temperature charging protection.
Technical Specifications
| Nominal Voltage | 51.2V (16S LiFePO4) |
|---|---|
| Nominal Capacity | 660Ah |
| Energy | ≈ 33.8 kWh |
| Battery Chemistry | LiFePO4 (lithium iron phosphate) |
| Cycle Life | 3,500+ cycles at 80% DoD |
| BMS | Smart BMS: over/under-voltage, over-current, short-circuit & temperature protection, cell balancing |
| Communication | CAN bus / RS485 for forklift & host integration |
| Enclosure | Sealed, vibration-resistant industrial enclosure |
| Certifications | UL 1973, IEC 62619, UN 38.3, CE, and RoHS |
| OEM/ODM | Custom voltage, capacity, BMS, and enclosure available |
Full mechanical drawings, dimensions, weight, and discharge curves are available in the downloadable datasheet — contact CMX for the complete specification.
Application Scenarios
The 51.2V 660Ah LiFePO4 pack is purpose-built for electric material-handling and light electric-mobility equipment, including:
- Mini forklifts & walkie stackers — direct lead-acid replacement for small warehouse and retail forklifts that run multiple shifts.
- Electric pallet trucks & tow tractors — a compact, low-weight pack that improves maneuverability while extending run time per charge.
- Low-speed electric vehicles — neighborhood EVs, electric utility carts, and groundskeeping vehicles needing a safe, maintenance-free 51.2V power source.
- AGV & automated guided vehicles — stable, fast-charging power for automated warehouses and production lines.
- Electric golf carts & airport / campus tugs — reliable daily-service energy with opportunity charging between runs.
Because it is a 51.2V LiFePO4 system with a protected smart BMS, the pack is also a strong base for custom OEM/ODM electric-vehicle and material-handling projects — see our forklift & AGV LiFePO4 OEM guide or contact CMX to size a configuration for your equipment.
Why Choose Shenzhen CMX Battery Co., Ltd.
Shenzhen CMX Battery Co., Ltd. is a 9+ year LiFePO4 battery manufacturer with an annual cell-and-pack capacity of 5.8 GWh and an in-house factory in Tangxia, Dongguan, China. We provide OEM/ODM for voltage, capacity, BMS, and enclosure, and every pack ships with certified cells (UL 1973, IEC 62619, UN 38.3, CE, and RoHS). Our engineering team supports system sizing, standard BMS communication, and global compliance so integrators and distributors can deploy with confidence.
FAQ
Can it replace my forklift lead-acid battery?
Yes. The 51.2V 660Ah pack is built as a drop-in forklift battery with 100% usable capacity.
How much runtime do I gain?
LiFePO4 keeps voltage flat through discharge and supports opportunity charging, extending daily uptime versus lead-acid.
Get a Quote & Datasheet
Need pricing, lead time, or the full specification for the CMX 51.2V 660Ah LiFePO4 Battery for Mini Forklift and Electric Vehicle? Our team replies with a quote, OEM/ODM options, and the downloadable datasheet. You can also reach us at sales@cmxbattery.com.
You must be logged in to post a review.


Product & Packaging Details
Q: Do batteries include protection circuits(BMS) and connectors?
A:Protection: We supply batteries with BMS built in Protection Circuit Modules (PCM).
Connectors: We normally use standard like anderson,M8 lugs,Fast plugs or depends on OEM customer's demands.
Q: Are batteries Grade-A and brand new?
A: Yes, we use 100% brand new, Grade-A cells in all our batteries.
Q: Can you print our logo on the batteries?
A: Yes, we offer free custom logo printing with a minimal MOQ requirement.
Q: What is your standard packaging? Can it be customized?
A: Our standard is a white box per battery. We fully support customized packaging, including carton box and logo design.
Yes. CMX Battery is a manufacturer located in Shenzhen, Guangdong, China. It designs and produces LiFePO4 battery packs for energy storage, electric forklifts, marine applications, golf carts, RVs, and UPS systems.
Lead time depends on the product: standard battery packs are typically 15-25 days, while larger integrated systems such as our mobile EV charging units are 35-45 days. The exact schedule is confirmed in your quotation.
The company has strategic cooperation agreements with top manufacturers like EVE and REPT, and insists on using A+ tier One lithium iron phosphate cells for its solar batteries.
For 48V inverters, compatible brands include Victron Energy, Goodwe, Studer, Solis, LuxPower, and others. For high-voltage three-phase inverters, compatible brands include Atess, Solinteg, SAJ, Goodwe, and Solis.
CMX Battery offers dealer customers a 10-year warranty and technical service for its energy storage battery products.
DoD describes how much of the battery's capacity has been used. A DoD of 100% means the battery is completely empty, while 0% means it is full.
SoC reflects the battery's charge level. A SoC of 100% means the battery is full, and 0% means it is empty.
C-rate, or power factor, indicates how quickly a battery can be charged or discharged relative to its capacity. A rating of 1C means the battery can be fully charged or discharged in one hour.
The battery uses Lithium Iron Phosphate chemistry and provides a cycle life of over 6,000 cycles at 90% Depth of Discharge, and over 10 years at one cycle per day.
kW (kilowatt) is a unit of power, measuring the rate of energy production or consumption. kWh (kilowatt-hour) is a unit of energy, measuring the total amount of work done or energy used over time.
CMX Battery home batteries are suitable for both indoor and outdoor installation (depending on the model's protection level) and offer floor-standing or wall-mounted options. Common locations include garages, attics, or under eaves.
This depends on the load. As a realistic example, a 10kWh battery could run ten 100-watt light bulbs for 12 hours without recharging.
The number varies based on home size, energy consumption history, and personal goals (like which devices to run during an outage). For most systems, 2 or 3 batteries are installed. A detailed discussion of your needs is recommended for an accurate assessment.
Yes, it is possible, but it requires careful planning and significant investment. A true off-grid system needs a large enough solar array and sufficient battery storage to sustain your lifestyle. Cost and having an alternative energy source for when solar charging isn't possible are key considerations.
No. CMX Battery focuses on building long-term relationships with business partners like battery distributors, solar equipment dealers, and installation contractors worldwide, not direct sales to end consumers.



Related products
24V 205Ah Lithium Forklift Battery | Drop-In Electric Pallet Jack Replacement
24V 280Ah LiFePO4 Crown Electric Forklift Battery | Fast Charging 7168Wh for AGV
CMX Battery 24V 280Ah LiFePO4 Forklift Battery – F24280F-A is a drop-in lithium solution for Crown forklifts, AGVs, and pallet jacks. End watering, reduce downtime, and increase productivity.
- 7.17kWh High Energy Output – 280Ah capacity provides extended runtime and consistent voltage under heavy loads
- Fast & Opportunity Charging – Recharge up to 80% in about 1.5 hours and charge during breaks without damaging battery life
- Maintenance-Free LiFePO4 Design – No watering, equalization, acid spills, or battery change rooms required
- 3,500+ Deep Cycles – Lasts up to 3–4× longer than traditional lead-acid forklift batteries
- Lower Operating Costs – Reduce energy consumption, maintenance labor, and replacement frequency by up to 70% over battery lifetime
24V 608Ah LiFePO4 Forklift Battery High Capacity Jungheinrich Pallet Jack Battery
The CMX Battery high-capacity 24v 608Ah Lithium forklift battery designed for Jungheinrich pallet jacks, delivering reliable, long-lasting performance in demanding material handling environments.
Built with Grade-A lithium iron phosphate cells, this forklift battery offers a superior alternative to traditional lead-acid options. It’s maintenance-free, supports fast charging, and provides a much longer service life, reducing equipment downtime and keeping your operations running smoothly.
By upgrading to this advanced LiFePO4 forklift battery, you can cut replacement frequency, improve energy efficiency, and save 20–40% on total cost of ownership over time. Whether you’re running a warehouse, distribution center, or manufacturing facility, this lithium forklift battery is a smart investment in performance, durability, and cost savings.
80V forklift lithium battery buying guide — model selection, runtime estimates, and charger compatibility.36V 608Ah Lithium Forklift Battery | High Capacity Electric Stacker Battery
The CMX Battery 36V 608Ah Lithium Forklift Battery is a robust 23.35kWh LiFePO4 pack built to replace lead-acid batteries without hassle. It charges in just 2-3 hours, lasts over 4000 cycles, needs zero maintenance, and keeps your electric stackers and forklifts running strong all shift long.
With IP65 protection, wide temperature tolerance, and a solid 10-year warranty, this battery helps cut downtime and operating costs in warehouses, factories, and cold storage environments.
80V forklift lithium battery buying guide — model selection, runtime estimates, and charger compatibility.36V 690Ah LiFePO4 Forklift Battery | Drop-in Replacement for 3-Wheel Electric Forklifts – F36690A
Zero-Maintenance | 26.5kWh Powerful Energy | One Battery for Multiple Shifts
- Exact same footprint as standard lead-acid tray – plug and play, no modifications, no watering, no equalizing.
- 320A continuous / 480A peak discharge delivers stable voltage and full power even when fully loaded with mast raised.
- Over 4000 cycles at 80% DOD – more than 8 years of service in double-shift operations.
- Smart BMS with CAN bus and RS485 communication. Optional self-heating supports charging down to -20°C.
- Direct shipping from CMX Battery factory in Guangdong with 10-year warranty
36V 820Ah LiFePO4 Forklift Battery | Extended Runtime for Heavy-Duty Warehouse Operations
Extended Runtime Power for Heavy-Duty Warehouse Operations
When forklift uptime directly impacts warehouse productivity, battery performance becomes critical.
The CMX Battery 36V 820Ah LiFePO4 Forklift Battery is designed for demanding material handling environments where forklifts operate for extended periods, move heavy loads, and work across multiple shifts every day.
With a usable energy capacity of 31.5kWh, this lithium battery provides longer operating hours, faster charging, and significantly lower maintenance requirements than traditional lead-acid batteries.
Built using premium lithium iron phosphate cells and an advanced Battery Management System (BMS), the battery delivers stable power output throughout the discharge cycle, helping operators maintain consistent lifting performance from the beginning of the shift to the end.
80V forklift lithium battery buying guide — model selection, runtime estimates, and charger compatibility.80V 460Ah Lithium Forklift Traction Battery | Motive Power Solution
- High-efficiency power delivery for demanding multi-shift operations with consistent voltage output.
- New Upgrade 80V 460Ah Forklift Battery Solution for Motive Power Industries featuring enhanced safety systems and smart monitoring.
- Maintenance-free design with rapid charging and over 3,500 cycles for maximum uptime.
- Superior safety profile and significant long-term cost savings versus traditional batteries.
- Robust construction ideal for heavy-duty material handling in warehouses, manufacturing, and logistics environments.
Customized 48V 690Ah Lithium Forklift Battery F48690BD | Long Cycle Life LiFePO4 Battery Pack for Walkie Stackers
Upgrade your material handling fleet with CMX Battery 48V 690Ah lithium forklift battery, engineered for maximum uptime in demanding applications.
This powerful LiFePO4 solution offers 35.33kWh of stored energy, rapid opportunity charging, and maintenance-free operation. Perfect for walkie stackers, pallet jacks, and electric pallet trucks.
Zero Maintenance — No watering, no acid spills, no equalization
Long Cycle Life — Over 3500 cycles at 80% DOD
Fast & Safe Charging — Full charge in hours with intelligent BMS
Drop-in Compatibility — Fits standard 48V forklift compartments
IP65 Rated — Built tough for warehouse, cold storage, and heavy-duty use













Reviews
There are no reviews yet.