An RV house bank lives a hard life of vibration and deep cycling — EGbatt builds LiFePO4 drop-ins that are lighter, deeper and longer-lived than the AGM it replaces.

Overview

EGbatt RV batteries are 12V or 24V LiFePO4 drop-ins with an integrated BMS, built for the vibration, depth of discharge and space limits of a motorhome. They replace AGM/GEL at a quarter of the weight and 3–5× the cycle life, with 80–90% usable DoD so you get more overnight power from the same footprint. The install caveat is the charging side: the converter, DC-DC and solar controller need a LiFePO4 profile, and we spec that with the battery so the system is right end to end.

Key specifications

SpecificationValueWhy it matters Voltage12.8V / 25.6VDrop-in for RV systems. Capacity100Ah typical; larger on requestDeep usable DoD. BMSIntegrated, vibration-ratedFull protection. Weight≈1/4 of lead-acidKey for RV payload. Cycle life2,000–5,000 cycles3–5× AGM.

Typical applications

  • Motorhome house bank: Lighter, deeper.
  • Travel trailer: 12V drop-in.
  • Van conversion: Space-limited builds.
  • RV solar: Paired with MPPT.

How to specify & buying guide

  • Set the converter/DC-DC/solar to a LiFePO4 profile — lead-acid charging damages the bank.
  • Size Ah from overnight load ÷ 12.8V at 80–90% DoD.
  • Keep cable/fuse ratings for the higher LiFePO4 current.
  • For cold climates, ask about low-temperature or self-heating cells.

Engineering & manufacturing at EGbatt

Portable and specialty packs are built for shock, dust and temperature swing. We select cells and BMS for high-discharge and fast-recharge profiles, seal the enclosure to the right IP rating, and validate the pack through drop, vibration and thermal cycling.

Certifications & compliance

  • UN38.3 — Mandatory lithium battery transport test (altitude, thermal, vibration, shock, external short). Required for any cross-border shipment.
  • IEC62619 — International safety standard for industrial Li-ion cells and batteries; expected by EU and most APAC buyers.
  • CE — EU declaration of conformity for the applicable directives.
  • RoHS — Restriction of hazardous substances in the battery and BMS.
  • IP65 — Dust-tight and low-pressure water-jet resistant — suitable for outdoor enclosures.

Frequently asked questions

Will it drop into my RV?

At 12.8V/25.6V yes, but set chargers to LFP.

How much longer than AGM?

3–5× the cycles and far deeper usable DoD.

Is it safe under vibration?

Yes — LiFePO4 chemistry plus a vibration-rated BMS and enclosure.

What capacity do I need?

Overnight kWh ÷ voltage at 80–90% DoD; we size from your load list.

Related products & resources

  • 12V LiFePO4
  • Marine Batteries
  • Low-Temperature Batteries

More in this series

  • Lithium Battery Products
  • LiFePO4 Cells
  • Cylindrical Lithium Cells
  • LiFePO4 Battery Modules
  • LiFePO4 Battery Management Systems (BMS)
  • Sodium-Ion Batteries
  • 12V LiFePO4 Batteries
  • 24V LiFePO4 Batteries
  • 48V LiFePO4 Batteries
  • Residential Energy Storage Systems
  • Commercial & Industrial Energy Storage
  • Containerised BESS
  • Portable Power Stations
  • Marine LiFePO4 Batteries
  • Golf Cart Lithium Batteries
  • Deep Cycle LiFePO4 Batteries
  • Trolling Motor Lithium Batteries
  • Forklift Lithium Batteries
  • Self-Heating LiFePO4 Batteries
  • Low Temperature Lithium Batteries
  • Hybrid Inverters
  • Inverter Chargers
  • MPPT Solar Charge Controllers

Request a quote

Send us your voltage, capacity, dimensions, certification target and annual volume. Our engineering team returns a proposal within three working days. Start your RFQ or review our custom pack capabilities.

Request a LiFePO4 quote

Tell us your product, volume and specs — our engineering team returns a proposal within three working days.

Error: Contact form not found.