Forklifts run in multi-shift fleets where downtime is money — EGbatt builds LiFePO4 packs that opportunity-charge in breaks and outlast lead-acid with no watering.

Overview

EGbatt forklift batteries are 24V/36V/48V/80V LiFePO4 packs with an integrated BMS, built as drop-ins for lead-acid traction batteries. The operational case is strong: opportunity charging during breaks (no battery-swap room needed), 2,000–5,000 cycles, no acid or watering, and consistent voltage through the shift so the truck does not sag as the battery drains. We match voltage and Ah to the truck and its duty cycle, and confirm the charger and connector (and any BMS comms the truck expects) before delivery.

Key specifications

SpecificationValueWhy it matters Voltage24 / 36 / 48 / 80VMatches the truck. ChargeOpportunity-charge in breaksNo swap room needed. Cycle life2,000–5,000 cyclesMulti-shift fleets. MaintenanceNone — sealed LFPNo watering/equalisation. BMSIntegrated, traction-ratedFull protection.

Typical applications

  • Warehouse fleets: Multi-shift duty.
  • Cold storage: Where LFP holds up.
  • Container handling: High-cycle.
  • Fully electric sites: No acid.

How to specify & buying guide

  • Match pack voltage exactly to the truck (24/36/48/80V).
  • Confirm the charger and connector; LFP needs a lithium profile and the right plug.
  • Check any BMS communication the truck's charger expects.
  • Size Ah from shift energy use, not just nameplate.

Engineering & manufacturing at EGbatt

Portable and specialty packs are built for shock, dust and temperature swing. We select cells and BMS for high-discharge and fast-recharge profiles, seal the enclosure to the right IP rating, and validate the pack through drop, vibration and thermal cycling.

Certifications & compliance

  • UN38.3 — Mandatory lithium battery transport test (altitude, thermal, vibration, shock, external short). Required for any cross-border shipment.
  • IEC62619 — International safety standard for industrial Li-ion cells and batteries; expected by EU and most APAC buyers.
  • CE — EU declaration of conformity for the applicable directives.
  • RoHS — Restriction of hazardous substances in the battery and BMS.
  • IP65 — Dust-tight and low-pressure water-jet resistant — suitable for outdoor enclosures.

Frequently asked questions

Can I opportunity-charge it?

Yes — charge during breaks; no battery-swap room required.

Does it fit my truck?

We match voltage and tray; confirm dimensions and connector.

How long does it last?

2,000–5,000 cycles vs ~1,000–1,500 for lead-acid traction.

Any maintenance?

None — sealed LiFePO4, no watering.

Related products & resources

  • Low-Temperature Batteries
  • 48V LiFePO4
  • Custom Pack Design

More in this series

  • Lithium Battery Products
  • LiFePO4 Cells
  • Cylindrical Lithium Cells
  • LiFePO4 Battery Modules
  • LiFePO4 Battery Management Systems (BMS)
  • Sodium-Ion Batteries
  • 12V LiFePO4 Batteries
  • 24V LiFePO4 Batteries
  • 48V LiFePO4 Batteries
  • Residential Energy Storage Systems
  • Commercial & Industrial Energy Storage
  • Containerised BESS
  • Portable Power Stations
  • RV Lithium Batteries
  • Marine LiFePO4 Batteries
  • Golf Cart Lithium Batteries
  • Deep Cycle LiFePO4 Batteries
  • Trolling Motor Lithium Batteries
  • Self-Heating LiFePO4 Batteries
  • Low Temperature Lithium Batteries
  • Hybrid Inverters
  • Inverter Chargers
  • MPPT Solar Charge Controllers

Request a quote

Send us your voltage, capacity, dimensions, certification target and annual volume. Our engineering team returns a proposal within three working days. Start your RFQ or review our custom pack capabilities.

Request a LiFePO4 quote

Tell us your product, volume and specs — our engineering team returns a proposal within three working days.

Error: Contact form not found.