Project Description

Small rechargeable 12v 10ah lithium ion-li ion battery

lightweight 12v 5ah lithium ion battery apply with high-quality 3s Lithium ion 18650 battery cells, the battery system come with built in PCM and wire+connector

12v cylinder battery

12v 5ah lithium ion cctv battery

  • Nominal voltage: 12v
  • Nominal capacity: 5ah
  • Discharge Capability: 5A
  • Battery Pack dimensions: 110*68*20MM
  • Energy: 60Wh
  • Approved certifications: UL, MSDS, UN38.3, CE
Ask for Quotation

Specifications

About lightweight 12v 5ah lithium ion battery

lightweight 12v battery apply with high-quality 3s lightweight 18650 cells, the battery system come with built in PCB protections

12v cylinder battery.

The 12v 5a battery pack builds by 3S cylinder battery cells. Internal PCM can effectively charge and discharge the battery pack.  prevent any battery overcharge, over discharge caused by damage, And can control the battery charge, discharge current,Ensure that the battery pack and applications are not damaged, To ensure that in the event of a short circuit failure when the output off and automatic balance of the application of the battery pack at any time in the best condition. The 12v cctv battery packed by Blue PVC.

Safety and economical

lightweight 12v battery with Newest cylinder  ICR18650 cells. Battery cell is tested before assemble. It does not have toxic chemicals and offers four times the power density at a third of the volume compared to lead acid. For these reasons it’s safe for household use.

Excellent discharge characteristics

lithium ion 12v 10ah With low internal resistance and high, flat voltage characteristics during strong current discharge, which ensures a wider application field. Like UPS/Solar System/CCTV System

Long cycle life

12v 5ah lithium ion battery Provide long storage life with few limiting conditions. It offers problem-free charge after long storage, permitting to use in a wide range of applications.

Safty Test:

  • Over-charge test
  • Over-discharge test
  • Short-circuit test
  • High-temperature test
  • Fire test
  • Squezzing test
  • Pin-Prick test
  • Fall down test
  • Water immersion test
  • Shooting test
Name Value
Product lightweight 5Ah 12v cctv battery
Model CMX18650-3S2P
Rated Capacity 5Ah
Nominal Voltage 12V
Over discharge protection voltage 12.6±0.05V
Over charge protection voltage 9.0V±0.05V
AC  (1KHz) Impedance New Cell Max.(mΩ) ≤120 mΩ
Maximum Continuous Charge Current ≤2A can be adjustable
Maximum Continuous Discharge Current ≤3A can be adjustable
Maximum Pulse discharge current ≤5A can be adjustable
Operation Temperature Range Charge: 0~45℃,Discharge: -20~60℃
Storage Temperature Range Less than 1 year: -20~25℃
Less than 3 months: -20~40℃
Storage Temperature Range Less than 30 Days: -25℃~45℃
Less than 90 Days: -25℃~30℃
Weight Approx 0.3kg
Cycle Characteristic  over 800 times
Export 2 wires/plugs/Connector
Dimension 20*70*115mm   ,  can be customized
12v cctv battery connector
  • Overcharge protection: When the battery is under the charging state, the voltage keeps going up. When the protection board detects that the voltage of any cell is higher than the overcharge protection value, the protection board will start timing immediately. When the time reaches the overcharge protection delay, the protection board will turn off the charging MOS tube, at that time, it cannot be charged.

  • Overcharge protection recovery: After the overvoltage protection appears on the protection board, the battery voltage will going down under the static or discharge state of the battery. When the protection board detects that each voltage is lower than the recovery voltage of the overcharge protection, the protection board will output a signal and turn on the charging MOS tube to charge.

  • Over-discharge protection: When the battery is under the discharge state, the voltage keeps going down. When the protection board detects that the voltage of any cell is lower than the overcharge protection value, the protection board will start timing immediately. When the time reaches the over discharge protection delay, the output signal of the protection board will turn off the discharge MOS tube, the load lock circuit will work, but, it cannot discharge at this time.

  • Over discharge protection recovery: After the over discharge protection appears on the protection board, the battery voltage will going up under the static or discharge state of the battery. When the protection board detects that each voltage is higher than the recovery voltage of the over discharge protection. At this time, disconnect the load or charge, the protection board will output a signal and turn on the charging MOS tube to charge.

  • Overcurrent protection: When the battery is under the static or discharge state, the current suddenly increases. When the protection board detects that the current reaches the overcurrent protection value, the protection board will start timing at that time. When the current duration in the circuit reaches the overcurrent protection delay time, the output signal of the protection board will turn off the discharge MOS tube, and the load lock circuit will work. At this time, the discharge cannot be conducted.

  • Overcurrent protection recovery: After the discharge overcurrent protection appears on the protection board, the discharge MOS tube is turned off, and the current in the loop becomes 0. At this time, the load is disconnected or charged, the output signal of the protection board will turn on the discharge MOS tube to discharge.

Summary
product image
Author Rating
1star1star1stargraygray
Aggregate Rating
no rating based on 0 votes
Battery Cell Type
CMX
Product Name
12v 5ah lithium ion battery